Description
The display is mounted. The camera is ready. The room account is signed in. Yet every meeting still starts with the same table drama. Someone reaches for a laptop. Someone asks where the share cable went. Someone else leans toward the wall screen to mute the room because nobody is sure which control belongs to what. That is the problem the Yealink CTP25 fixes. Not by adding another gadget. By giving the room one proper control point on the table.
The Yealink CTP25 is a 10.1-inch touch console built for Yealink room systems. One-touch join. Camera controls. Layout changes. Recording controls. Wired content sharing. BYOD use. USB-C charging for the laptop on the table. In Dubai meeting rooms where people move between Teams calls, client presentations, and internal reviews all in the same day, that matters more than most spec sheets admit. Yealink CTP25 UAE is the table device that stops the room from feeling like a collection of separate parts.
10.1″
IPS Touch Display
BYOD
Laptop Room Use
4K
Content Sharing
PoE
Single-Cable Setup
What the CTP25 Actually Does in a Meeting Room
The CTP25 is not a door panel and it is not a generic tablet you leave on the table. It is a dedicated meeting-room touch console designed to control a Yealink room system from where people actually sit. That sounds obvious. But it changes the way the room behaves.
Instead of staff walking to the display wall, searching through room menus, or relying on a laptop to run the room, the key functions sit right on the table. Join the meeting. Mute the room. Adjust the camera. Change layout. Start or stop recording. Share content. Use the room in BYOD mode. All from one place. In daily use, that takes a room from “it works if the IT guy sets it up first” to “anyone can walk in and start.”
That is exactly why the CTP25 works so well in Dubai offices where the same room is used by finance in the morning, sales after lunch, and a client team in the afternoon. Different users. Same table. One control point. Done.
Why a Proper Touch Console Matters More Than People Think
Meeting rooms go wrong in small ways before they go wrong in big ways. The cable is missing. The laptop battery is low. The host cannot find the room controls. Someone shares from the wrong screen. None of those are major technical failures. But together, they make the room feel unreliable.
The CTP25 solves that by reducing the number of things users have to improvise. The room has its own interface. The interface is always in the same place. The controls are made for the room, not borrowed from somebody’s laptop. That is a bigger upgrade than it looks on paper.
One-touch join
People walk in, tap the meeting, and start. Good for shared rooms where nobody wants to spend the first three minutes looking for the correct login or remote.
Table-side room control
Mute, camera movement, layout changes, and meeting actions stay on the table where the users are sitting. That is much better than forcing everyone to look toward the display wall.
Cleaner daily use
The room feels consistent from one meeting to the next. In offices with shared boardrooms, that consistency is what cuts user frustration the fastest.
In other words, the CTP25 does not make the room more complicated. It removes the small chaos that normally lives on the meeting table.
Which Rooms Fit the CTP25 Best
The CTP25 fits any room where the meeting system is on the wall and the users are around the table. That sounds broad because it is. Small meeting rooms. Medium boardrooms. Executive rooms. Rooms running Yealink all-in-one bars. Rooms using Yealink room systems where the table needs a real interface instead of a handheld remote or a laptop-led workflow.
| Room Type | Typical Use | Why CTP25 Fits |
|---|---|---|
| Huddle / Small Meeting Room | 2–6 people | Fast join, clean control, no need to depend on a laptop |
| Medium Meeting Room | 4–10 people | Better camera and layout control from the table |
| Boardroom | 6–12+ people | Useful for BYOD, wired sharing, and visible meeting controls |
| Client / Executive Room | Presentation-led meetings | Keeps the table tidy and the room feeling intentional |
Not the right fit?
If you are looking for an outside-the-room scheduling display by the door, this is not that product. The CTP25 is a meeting-table touch console. It makes sense when paired with a Yealink room system inside the room, not as a general-purpose office tablet.
More Than Join Control — BYOD, Sharing, and Charging
This is where most reseller pages undersell the CTP25. It is not only for tapping into meetings. The real value is that it also supports wired content sharing, BYOD use, and USB-C PD charging. That changes the product from a room controller into a genuinely useful table endpoint.
In practical terms, a visitor can walk in with a laptop, connect once, and use the room more naturally. Share content. Use the room camera and audio in BYOD mode where supported. Keep the laptop charged while presenting. In a Dubai office where external guests, consultants, and client teams move in and out of rooms all day, that is exactly the difference between a tidy room and a cable mess.
Wired content sharing
The panel supports laptop content sharing through the rear USB-C path. Useful when the presentation needs to work immediately without hunting for adapters around the table.
BYOD room use
Good for rooms where Teams or Zoom may be standard, but the visitor sometimes wants to run the meeting from their own laptop and account.
PD charging
The same connection path can keep the presenter’s laptop powered. Very useful in longer board meetings where nobody wants the session interrupted by a low-battery warning.
This is one of the smartest parts of the CTP25. It makes the table more useful without loading it with more clutter.
Display, Ports, and the Practical Details
The CTP25 uses a 10.1-inch IPS touch display with 1280 × 800 resolution and an anti-fingerprint surface. That last detail matters because this is a shared-table device, not something hidden in a rack. In a busy meeting room, the screen gets touched all day. Anti-fingerprint glass is one of those small details that saves the product from looking worn out too quickly.
It also gives you useful physical connectivity: one USB-A port, two USB-C ports, and one RJ45 port. Add PoE support, Wi-Fi 6, and Bluetooth 5.0, and the panel is easier to place cleanly in different room designs. There is also an ultrasound unit and a motion sensor built in, which helps the device behave like an active room console instead of a dead screen lying on the table.
For IT teams and installers, these are the details that determine whether the room feels easy or awkward after handover. For end users, they simply notice that the panel wakes up, works, and stays where it should.
Mounting Options — Table, Rotation, or Wall
Most rooms will use the included high stand on the table. That is the standard layout and it works well. But Yealink also gives optional mounting choices that matter more than you might think. There is a rotatable desktop mount and an optional wall mount.
That means the CTP25 can be fitted to the room instead of forcing the room to fit the accessory. Some boardrooms in DIFC want a clean executive table with nothing sitting loose in the middle. Some rooms in JLT or Business Bay have a side credenza layout that suits a wall-mounted control point better. Some spaces want the console to rotate toward whoever is presenting. The CTP25 supports those decisions properly.
Again, this sounds minor until installation day. Then it becomes very important.
Best Used with the Right Yealink Room System
This is worth saying clearly. The CTP25 should be specified with the Yealink room device it is meant to control. That is the correct way to buy it. Not as a stand-alone “maybe we’ll use it for something” touch screen.
It makes the most sense in rooms already using products such as the MeetingBar A40, MeetingBar A25, or other Yealink room systems where the table needs a proper touch endpoint. In those setups, the panel becomes the visible control surface that users actually interact with every day.
That is also why it sells well in UAE offices standardising around one room platform across multiple meeting spaces. Same room logic. Same table control. Less retraining from one room to the next.
What’s in the Box and Why It Matters
Standard CTP25 package: CTP25 touch console, high stand, 7.5m Ethernet cable, 1.2m USB-C cable, 65W PD power adapter, and standard setup materials.
That cable pack matters because it shows how the product is meant to be deployed in a real room, not only on a showroom table. A 7.5-metre Ethernet cable gives the installer more freedom between the table position and the room endpoint location. The 1.2-metre USB-C cable is exactly the sort of included item that saves the room from starting life with the wrong cable borrowed from someone’s desk.
Not included — order separately if needed
Rotatable desktop mount, wall mount, room system endpoint, display/TV, structured cabling work, and any site-specific furniture modifications. WhatsApp for a combined quote with the correct room hardware.
Technical Specifications
| Specification | Detail |
|---|---|
| Display | 10.1-inch IPS touchscreen |
| Resolution | 1280 × 800 |
| Surface | Anti-fingerprint |
| Operating System | Android 13 |
| Ports | 1 × USB-A, 2 × USB-C, 1 × RJ45 |
| Networking | PoE (802.3af), Wi-Fi 6, Bluetooth 5.0 |
| Sensors | Motion sensor and ultrasound unit |
| Mounting | Included high stand, optional rotatable desktop mount, optional wall mount |
| Included Cables | 7.5m Ethernet cable, 1.2m USB-C cable, 65W PD power adapter |
Installation in Dubai and Across the UAE
A touch console can be installed badly even when the device itself is good. Wrong table position. Cable exit in the wrong place. Panel too far from the actual host seat. Wall mount chosen when the users really need table access. These are the details that decide whether people actually use the console or ignore it.
1
Pre-installation — We confirm the Yealink room system it will control, the room table layout, cable route, power/network path, and whether the panel should sit on the table or be mounted elsewhere.
2
Installation — Standard setup includes mounting or placement, pairing with the room system, network/power connection, content-sharing path check, and cable management. Most standard room installs take around 1.5 to 3 hours depending on the room hardware and table layout.
3
Live test — We verify join flow, camera controls, layout controls, sharing behaviour, BYOD path where applicable, and general usability before handover.
Coverage — Yealink CTP25 supply and installation in Abu Dhabi, Dubai, Sharjah, and all UAE emirates. That includes Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. Installation is included and planned around the room, not handled as an afterthought.
Where It Fits in the Yealink Range
The CTP25 belongs in the Yealink room ecosystem, especially where the table needs a stronger user interface than a remote control can provide. It fits naturally with the Yealink video conferencing range and the wider Microsoft Teams category.
For rooms needing accessories, mounts, and related hardware, browse the Yealink accessories category. If you are pairing it with a room system, the most common matches are in the MeetingBar and MVC ranges, including MeetingBar A40, MeetingBar A25, and MVC S40.
That is the best way to think about it. Not as a tablet to buy alone. As the missing table interface for a room system that should feel complete.
Export Supply from Dubai
We supply Yealink CTP25 from Dubai to AV installers, system integrators, and IT contractors working on room-control projects in Tanzania, Nigeria, South Africa, Kenya, Ethiopia, and Ghana. FOB Dubai export pricing is available for project quantities and bundled room-system orders. WhatsApp +971 55 986 3697 with your quantity, room type, and destination country.
Frequently Asked Questions
Is the Yealink CTP25 a room booking panel for outside the meeting room?
No. The CTP25 is a touch console used inside the meeting room on the table or wall. It is designed for meeting control, sharing, and BYOD use with a Yealink room system.
What does the CTP25 do besides joining meetings?
It also handles camera controls, layout changes, recording control, wired content sharing, BYOD room use, and USB-C PD charging where the room setup supports it.
Can visitors use the room from their own laptop through the CTP25?
Yes, that is one of the useful reasons to install it. In the right Yealink room setup, the CTP25 supports BYOD and wired sharing, which helps visitor-led meetings run much more smoothly.
Does the CTP25 come with cables and a stand?
Yes. The package includes the high stand, a 7.5m Ethernet cable, a 1.2m USB-C cable, and a 65W PD power adapter.
Can the CTP25 be wall-mounted instead of placed on the table?
Yes. The standard setup is table-based, but Yealink also offers an optional wall mount and an optional rotatable desktop mount.
How long does CTP25 installation take in Dubai?
Most standard installations take around 1.5 to 3 hours depending on the room system, cable path, and whether the room also needs content-sharing or BYOD setup checked during commissioning.
Is the Yealink CTP25 in stock in Dubai?
Stock changes with project demand, so the fastest way is to WhatsApp us for live availability and current AED pricing.
Do you supply and install CTP25 in Abu Dhabi too?
Yes. We cover Abu Dhabi, Dubai, Sharjah, and all UAE emirates, with installation planned around the actual room layout and Yealink endpoint it will control.
Yealink CTP25 in stock in Dubai. Supply and installation across all 7 UAE emirates. AED pricing confirmed on WhatsApp in 30 minutes. Monday to Saturday, 8AM to 6PM.
